This knife is designed for raising 5/8" thick panels with 1/4" tongues. Can be used for raising 3/4" panels when using optional back cutters RP-OPS or RP-OPB. The specially designed knife removes all splinters on cross grain cuts.
Uses: Knife RP-A and Head
RP1000
RP-B
SKU:
RP-B
This knife is designed for raising 5/8" thick panels with 1/4" tongues. Can be used for raising 3/4" panels when using optional back cutters RP-OPS or RP-OPB. The specially designed knife removes all splinters on cross grain cuts.
Uses: Knife RP-B and Head
RP1000
RP-C
SKU:
RP-C
This knife is designed for raising 5/8" thick panels with 1/4" tongues. Can be used for raising 3/4" panels when using optional back cutters RP-OPS or RP-OPB. The specially designed knife removes all splinters on cross grain cuts.
Uses: Knife RP-C and Head
RP1000
RP-D
SKU:
RP-D
This knife is designed for raising 5/8" thick panels with 1/4" tongues. Can be used for raising 3/4" panels when using optional back cutters RP-OPS or RP-OPB. The specially designed knife removes all splinters on cross grain cuts.
Uses: Knife RP-D and Head
RP1000
RP-E
SKU:
RP-E
This knife is designed for raising 5/8" thick panels with 1/4" tongues. Can be used for raising 3/4" panels when using optional back cutters RP-OPS or RP-OPB. The specially designed knife removes all splinters on cross grain cuts.
Uses: Knife RP-E and Head
RP1000
RP-OPS
SKU:
RP-OPS
Back-Cutter For Performance System®
This back-cutter is designed to be used with knives RP-A, RP-B, RP-C, RP-D, or RP-E on the RP1000 head. This allows the use of 3/4" to 13/16" thick panels while maintaining a 1/4" tongue.
RP-A34
SKU:
RP-A34
This knife is designed for raising 3/4" thick panels with 1/4" tongues. When used with 3/4" rail and stiles, the panel will extend outside the door frame. The specially designed knife removes all splinters on cross grain cuts.
Uses: Knife RP-A and Head
RP1000
RP-B34
SKU:
RP-B34
This knife is designed for raising 3/4" thick panels with 1/4" tongues. When used with 3/4" rail and stiles, the panel will extend outside the door frame. The specially designed knife removes all splinters on cross grain cuts.
Uses: Knife RP-B34 and Head
RP1000
RP-C34
SKU:
RP-C34
This knife is designed for raising 3/4" thick panels with 1/4" tongues. When used with 3/4" rail and stiles, the panel will extend outside the door frame. The specially designed knife removes all splinters on cross grain cuts.
Uses: Knife RP-C34 and Head
RP1000
RP-D34
SKU:
RP-D34
This knife is designed for raising 3/4" thick panels with 1/4" tongues. When used with 3/4" rail and stiles, the panel will extend outside the door frame. The specially designed knife removes all splinters on cross grain cuts.
Uses: Knife RP-D34 and Head
RP1000
RP-E34
SKU:
RP-E34
This knife is designed for raising 3/4" thick panels with 1/4" tongues. When used with 3/4" rail and stiles, the panel will extend outside the door frame. The specially designed knife removes all splinters on cross grain cuts.
Uses: Knife RP-E34 and Head
RP1000
RP-OPB
SKU:
RP-OPB
Back-Cutter For Performance System®
This back-cutter is designed to be used with knives RP-A, RP-B, RP-C, RP-D, or RP-E on the RP1000 head. This allows the use of 3/4" to 13/16" thick panels while maintaining a 1/4" tongue.
RP-A
